Chuck size 6"
Chuckable diameter:
With 3-Jaw chuck 41mm
With optional collet chucks 45mm
Slide strokes:
X1 160mm
Z1 400mm
Y +/- 50mm
X2 110mm
Z2 150mm
Rapid traverse speeds:
X1 & X2 8m / min.
Z1 & Z2 10m / min.
Y 6m / min.
C 20 RPM
No. of turret stations:
T1 16
T2 8
Main spindle speeds:
High-speed version 50 to 5,000 RPM
Low-speed version 40 to 3,550 RPM
Maximum cutting torque:
High-speed version 8.77 kgf-m/1,666 RPM
Low-speed version 12.33 kgf-m/1,183 RPM
Sub spindle:
Maximum chucking diameter 41mm
Maximum chucking length 120mm
Tool sizes:
For OD machining 20 x 115mm
For ID machining 25mm (diameter)
Motors:
For main spindle 15 / 11 kW
For tool spindles 3.7 / 2.2 kW
For hydraulic system 1.5 kW
For coolant system 370W
Tank capacities:
Hydraulic tank 70L
Coolant tank 180L
Hydraulic-Oil tank 2.0L
Machine dimensions( width x depth x height) 3,300mm x 2,200mm x 1,900mm
Machine weight 5,500 kg
Required electrical capacity 45 KVA
NC Specifications:
Type of NC system Fanuc Series OT Model A (2 units)
No. of controlled axes 6 (X1, X2, Y, Z1, Z2, & C)
Minimum setting increment For all axes except C-axis (diametrical designation for X axis) 0.001mm
For C-Axis 0.001 deg.
Tape codes EIA RS-244 & ISP 840 (automatic discrimination)
Rapid traverse speed:
X-Axis 8m / min.
Y-Axis 6m / min.
Z-Axis 10m / min.
C-Axis 7,200 deg./min. (20 RPM)
Interpolation Linear & Circular
Feedrate commands in mm/rev., mm/min or deg/min
Feedrate override 0 to 150 %
Thread leads 0.0001 to 30.000mm
Spindle functions 4-Digit S-Code
Coolant surface speed control Standard
Tool functions 4-Digit T-Code
No. of tool offsets 48 (front:16, rear: 32)
Tape memory length 20m (CMOS memory)
Reference point return Manual & automatic
Manual pulse generator 1 Unit
Single block Standard
Optional skip Standard
Optional stop Standard
Dry run Standard
Machine lock Standard
Single fixed cycles Standard
Multiple fixed cycles Standard
Stored stroke check #1 Standard
Tool point radius compensation For X and Z-axis Tape reader Standard RS232C interface Standard
Standard Accessories:
Hydraulic power unit 1
Chuck pressure adjustment device 1
High performance (0.001 deg.) C-Axis control 1
Sub-spindle 1
Back-end working tool station 1 Set
Hydraulic cylinder for hollow chuck 1
Coolant tank piping 1 Set
Automatic lubrication unit 1 Set
Y-Axis function 1 Set